Five Points to Increase Capacity of Impact Crusher


Adopting the latest manufacturing technology and unique structure design, the PF series impact rock crusher can produce cubic products with very good grain shape without tension and crack. It can crush each kind of coarse, medium, fine cubic material (granite, limestone and concrete etc) with feeding size not more than 500mm and crushing strength not more than 350MPa and is widely applied to secondary and tertiary crushing of various ores and medium-hard materials in railway, highway, energy, cement, chemical industry construction etc.

Impact crusher , also known as crusher is widely used in metal and nonmetal ores , cement, refractories, abrasives, glass raw materials , construction aggregate , artificial sand and a variety of metallurgical slag crushing and coarse grinding operations , particularly for in hard, extra hard and abrasive materials such as silicon carbide , carborundum, sintered bauxite, magnesite , etc. , has more advantages than other types of crushers .

impact crusher capacity factors of general understanding. Generally speaking, there are many factors that affect the production capacity of the impact crusher , generally speaking, so five factors , the following will these five factors described and propose appropriate solutions .

(1)Material hardness : the harder the material system sand is more difficult , but the more serious wear and tear on the equipment . Sand making slow , low capacity . Therefore we need attention to the choice of materials .

(2)The composition of the materials : impact crusher before the material containing the powder , the more the more impact sand system , because the powder easy adhesion of delivery . Therefore, the powder content of the materials in advance should a sieve . Fine as far as possible from the material to filter out , so as not to affect the normal working of the impact of sand making machine . To a service-oriented brand integrity, as the professional manufacturer of complete sets of mining machinery, like Sand making machine, Henan Hongxing is always doing the best in products and service.high pressure grinding mill: http://www.crusher-machine.com/n164.html

(3)The viscosity of the material : the greater the viscosity of the material , the more likely adhesion . Hxjq impact crusher , high viscosity materials will adhere to the inner wall of the cavity of sand , if not promptly clean up , will affect the work efficiency of the impact the sand making machine , serious cases may affect the impact sand making machine work properly. Therefore , in the choice of materials , we must pay attention to the viscosity of materials not too much .

(4)The humidity of the materials : the materials with water when the material in the impact machine of sand content and easy adhesion , but also easy to cause blockage in the conveying process of the next material , reduce the ability of the system of sand . The solution to this problem , first of all materials selected is necessary to strictly control the humidity of the material , if the choice of materials, excessive humidity , sunshine or air-dried can be used to reduce the percentage of moisture in materials .

(5)The composition of the materials : impact crusher before the material containing the powder , the more the more impact sand system , because the powder easy adhesion of delivery . Therefore, the powder content of the materials in advance should a sieve . Fine as far as possible from the material to filter out , so as not to affect the normal working of the impact of sand making machine .

This entry was posted in BIOSSAM. Bookmark the permalink.

Leave a Reply