Deep Understanding of Work Ways of Cone Crusher


With the development of new energy technologies, and computer technology, the market demand for silicon products is growing, crystalline silicon is extracted from quartz sand.Quartz sand processing is bound to become a hot industry. Quartz sand quartzite processing, resource-rich country quartzite, about 32 billion tons of proven reserves.Quartz sand is a hard, wear-resistant, stable chemical properties of silicate minerals,cone crusher the main mineral component of up to 99% of SiO2, quartz sand color with red or colorless translucent milky, Mohs hardness 7, sexual brittle cleavage, conchoidal fracture, oil sheen, the relative density of 2.65, its chemical,Rotary Kiln thermal and mechanical properties have obvious anisotropy, insoluble in acid, slightly soluble in KOH solution, the melting point of 1750 C.Quartz sand is an important industrial mineral raw materials, quartz stone manufacture of glass, refractories, smelting ferrosilicon, metallurgical flux, ceramics, abrasives,

When cone crusher is running, Fixed Cone together with the vertical axis driven by the eccentric bushings, eccentric bushings to the horizontal axis and the bevel gear and pulley to drive. Triangle from the motor pulley belt transmission. Vertical Axis eccentric sleeve into the bottom, when the eccentric sleeve rotation, the shaft to draw a cone surface. So Cone moving around at the fixed cone shall crushed ore. From the upper and lower chassis composed of two parts, connected by bolts. Bolt on kits in a strong spring, when spring is the role of metal or other hard objects into the crushing chamber, will not damage breakers (such as spindle, etc.). Sometimes cone crusher is to use oil (or water) discharge device to adjust the size of mouth.

Ore from the mine mouth through the allocation of disk into the machine, and distribution vertical shaft was installed in the end, due to the vertical axis rotation, and access to vibration, uniform distribution of the ore in the cone around. With the help of the Toggle handle and hinge, the cone is not moving upward or downward, to regulate the discharge of the mouth width. Steel with the various components are manufactured, dynamic cone and fixed cone face laced with manganese steel liner to protect the cone from wear, worn liner can be replaced, the replacement, the liner between the cone and poured melted Lead close bond between them. To a service-oriented brand integrity, as the professional manufacturer of complete sets of mining machinery, like ore separating line, Henan Hongxing is always doing the best in products and service.high frequency mineral screen: http://www.crusher-machine.com/n141.html

Chronology cone crusher, called short head cone crusher, or called “circular grinding.” With brokencone crusher in the same basic structure, the only difference lies in dynamic cone and fixed cone different shapes. Short head cone crusher dynamic cone and fixed cone than shorter, and the parallel between the two cone with a long, and I to mine discharge mouth is relatively small, so the products can be relatively small (5-10 mm) .

In addition to the standard head – and short-cone crusher, but also between them, namely the difference between the medium-sized cone crusher that can be used can also be used in the broken chronology. Standard, medium-sized, short head cone crusher The main difference is the crushing chamber profile different shapes. Therefore, to the mine discharge particle size and particle size are also different.

Broken cone so that the broken wall sometimes and sometimes near the left-loaded adjustment got caught up in the rolling acetabular wall surface so that the ore cavity constantly being broken in the impact, squeezing and bending role of the realization of ore crusher. Motor driven by bevel gear sets eccentric rotation, a rotation broken cone pendulum movement. Cone sometimes broken and sometimes left near the fixed cone, and broken completed nesting. Support kits and the link-body pressing on spring, when the breakers can not be broken into, such as metal objects, which produce compressive deformation spring, from the foreign body, achieving insurance to prevent machine damage.

This entry was posted in BIOSSAM. Bookmark the permalink.

Leave a Reply